IPercept 30-day Technical Evaluation

Service · Audit & assessment by IPercept

Prove CNC predictive maintenance ROI in 30 days with no IT integration.

A 30-day pilot program for manufacturers to implement component-level CNC machine monitoring without IT integration. It provides actionable health insights for bearings and spindles within one week to prove predictive maintenance ROI.

Languages
English, German

Category: Predictive Maintenance

Duration
30 days
Industries served
Defence, aerospace, and general manufacturing
Evaluation Duration
30 days
Installation Time
2 hours typical
Time to First Insight
7 days average
Machine Compatibility
50+ brands, any age or model
  • 30-day pilot program for CNC monitoring
  • 7 days average to first actionable insight
  • No controller or IT integration required
  • Component-level health for 50+ machine brands
  • Installation completed in a couple of hours

Overview

The IPercept 30-day Technical Evaluation is a pilot service for manufacturers to experience component-level CNC machine monitoring before a full deployment. The service utilizes a patented Smart IIoT Device that is installed on the machine's kinematic chain in a couple of hours without requiring controller or IT integration. It is designed for any CNC machine brand, model, or age, providing high-precision insights into the health of bearings, ballscrews, guides, and spindles. Within an average of seven days, the evaluation delivers actionable insights and recommended maintenance actions through the IPercept Portal or Machine Health Reports. This program allows organizations to transition from schedule-based to condition-based maintenance by identifying developing faults early. It has been deployed at production sites for defence and aerospace manufacturers to reduce unplanned downtime and optimize maintenance efforts.

Implementation and Setup

  • Hardware Deployment: The evaluation includes the installation of a patented Smart IIoT Device on the machine's kinematic chain to capture motion data.
  • No-Integration Setup: The system operates without controller or IT integration, requiring only a power outlet for operation.
  • Self-Calibration: The device configures itself to any CNC machine during the evaluation period through self-calibration.
  • Brand-Agnostic Monitoring: The program is available for any CNC machine brand, model, or age, from twenty-year-old builds to brand-new five-axis machines.

Assessment and Insights

  • Rapid Insight Generation: The evaluation delivers high-precision, component-level insights within days of hardware installation.
  • Component-Level Health: The service identifies developing faults at the component level for bearings, ballscrews, guides, and spindles.
  • Actionable Recommendations: Users receive structured observations with recommended actions categorized by urgency to prevent unplanned stops.
  • Utilization Tracking: The system provides insights into machine performance by categorizing activity into operating states like Off, Idle, and On.

What's included

  • Smart IIoT Device installation, motion data capture, diagnostic modeling, and Machine Health Reports

Deliverables

  • Machine Health Reports, access to IPercept Portal, component-level insights, and recommended actions

How it works

  • Hardware installation, self-calibration, data capture and transmission, diagnostic analysis, and insight delivery via portal or reports

Use cases

  • Maintenance managers install the device on critical CNC machines to identify developing ballscrew or spindle faults before they cause failure.
  • Production teams use the 30-day period to track machine utilization states and identify causes of efficiency loss.
  • Service providers deploy the evaluation to provide customers with fact-based maintenance recommendations and optimized service schedules.

Specifications

Duration
30 days
Delivery
On-site hardware installation with remote data analysis and portal access
Industries served
Defence, aerospace, and general manufacturing
Evaluation Duration
30 days
Installation Time
2 hours typical
Time to First Insight
7 days average
Machine Compatibility
50+ brands, any age or model
Integration Requirements
None (No controller or IT project)
Power Requirement
Standard power outlet
Data Transmission
Wireless communication
Monitored Components
Bearings, ballscrews, guides, spindles

How it works

  1. Hardware Installation: The IPercept Smart IIoT Device is installed on the machine's kinematic chain in a couple of hours, requiring only a power outlet.
  2. Data Capture and Transmission: The device captures motion and vibration data and transmits it wirelessly to the IPercept reporting platform without IT integration.
  3. Diagnostic Analysis: IPercept's diagnostic models analyze the motion patterns to detect issues and identify developing faults at the component level.
  4. Insight Delivery: Actionable insights and recommended maintenance actions are delivered through the IPercept Portal or structured Machine Health Reports.

FAQ

How long does it take to see results?

The evaluation typically delivers its first actionable insights within an average of 7 days after the hardware is installed.

Does it require integration with my machine controller?

No, the IPercept Smart IIoT Device operates without controller or IT integration, requiring only a power outlet.

What types of machines can be evaluated?

The evaluation is brand-agnostic and works with any CNC machine brand, model, or age, including machines over twenty years old.

How long does the installation take?

The hardware installation on the machine's kinematic chain typically takes a couple of hours.

Start a 30-day evaluation

Added by AntSpace from public sources (ipercept.io).

Related

More services by IPercept